2013-07-11_12_17_26
linux26
linux26 update log - PASS
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
* branch master -> FETCH_HEAD
Already up-to-date.
linux26 version log - PASS
commit 6d128e1e72bf082542e85f72e6b7ddd704193588
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed Jul 10 19:02:51 2013 -0700
Revert "Makefile: Fix install error with make -j option"
This reverts commit d2aae8477cd00325bb7c7c7e95be488088900c48.
It is completely and utterly broken. Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.
The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files. They should only ever copy the
already-built files over.
So having dependencies for the install targets is wrong, wrong, wrong.
If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux26 test log - PASS
spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc (intc)
setting qdev prop "kind-of-intr" = 0x00000100
connected irq : (none)
FDT: Creating QDEV model xilinx,timer
setting qdev prop "frequency" = 0x03b20b80
setting qdev prop "nr-timers" = 0x00000002
connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite
setting qdev prop "chr" = 0x093fb4e0
connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000,
FDT at 0x90446c2c
Linux version 3.10.0-08982-g6d128e1 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Thu Jul 11 12:10:42 CEST 2013
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x90443000 size=0x00443000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
DMA [mem 0x90000000-0x9fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902f3eec, node_mem_map 90445000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65536 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Sorting __ex_table...
Memory: 255480K/262144K available (2262K kernel code, 90K rwdata, 636K rodata, 1010K init, 323K bss, 6664K reserved)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
No chosen timer found, using default
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 102.40 BogoMIPS (lpj=512000)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switched to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 498
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1008K (902f5000 - 903f1000)
Bad inittab entry at line 3
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Setting up interface eth0:
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd:
Mounting nfs server
uclinux login: root
Passwordpass ok
:
/root # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/root # cat /proc/cpuinfo
CPU-Family: MicroBlaze
FPGA-Arch: virtex5
CPU-Ver: 7.10.d, big endian
CPU-MHz: 125.00
BogoMips: 102.40
HW:
Shift: yes
MSR: yes
PCMP: yes
DIV: yes
MMU: 3
MUL: v2
FPU: v2
Exc: op0x0 unal ill zero fpu
Stream-insns: privileged
Icache: no
Dcache: no
HW-Debug: no
PVR-USR1: 00
PVR-USR2: 00000000
Page size: 4096
/root # strace ls /
strace: applet not found
/root #
Statistic
3.10.0-08982-g6d128e1
4.1.2
CLEAN .
CLEAN arch/microblaze/kernel
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN arch/microblaze/boot
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/dtc
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config include/generated arch/microblaze/include/generated
CLEAN .config .version include/generated/uapi/linux/version.h Module.symvers
linux_next
linux_next update log - PASS
Switched to branch 'master'
Deleted branch next (was 0ed44023).
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
* branch master -> FETCH_HEAD
Already up-to-date.
From ../linux-2.6
* branch HEAD -> FETCH_HEAD
Already up-to-date.
Fetching origin
Fetching linux-next
Switched to a new branch 'next'
Branch next set up to track remote branch master from linux-next.
linux_next version log - PASS
commit 0ed4402317bf2f3e579b86081ccde0fb5ad55b4b
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu Jul 11 14:04:42 2013 +1000
Add linux-next specific files for 20130711
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
linux_next test log - PASS
spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc (intc)
setting qdev prop "kind-of-intr" = 0x00000100
connected irq : (none)
FDT: Creating QDEV model xilinx,timer
setting qdev prop "frequency" = 0x03b20b80
setting qdev prop "nr-timers" = 0x00000002
connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite
setting qdev prop "chr" = 0x0a70f4e0
connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000,
FDT at 0x90448c2c
Linux version 3.10.0-next-20130711 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Thu Jul 11 12:15:05 CEST 2013
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x90445000 size=0x00445000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
DMA [mem 0x90000000-0x9fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902f5ef8, node_mem_map 90447000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65536 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Sorting __ex_table...
Memory: 255472K/262144K available (2264K kernel code, 94K rwdata, 636K rodata, 1010K init, 323K bss, 6672K reserved)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
No chosen timer found, using default
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 118.16 BogoMIPS (lpj=590848)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switched to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 498
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1008K (902f7000 - 903f3000)
Bad inittab entry at line 3
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Setting up interface eth0:
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd:
Mounting nfs server
uclinux login: root
Password: pass ok
/root # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/root # cat /proc/cpuinfo
CPU-Family: MicroBlaze
FPGA-Arch: virtex5
CPU-Ver: 7.10.d, big endian
CPU-MHz: 125.00
BogoMips: 118.16
HW:
Shift: yes
MSR: yes
PCMP: yes
DIV: yes
MMU: 3
MUL: v2
FPU: v2
Exc: op0x0 unal ill zero fpu
Stream-insns: privileged
Icache: no
Dcache: no
HW-Debug: no
PVR-USR1: 00
PVR-USR2: 00000000
Page size: 4096
/root # strace ls /
strace: applet not found
/root #
Statistic
3.10.0-next-20130711
4.1.2
CLEAN .
CLEAN arch/microblaze/kernel
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN arch/microblaze/boot
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/dtc
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config include/generated arch/microblaze/include/generated
CLEAN .config .version include/generated/uapi/linux/version.h Module.symvers
