2013-03-28_12_15_38
linux26
linux26 update log - PASS
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
* branch master -> FETCH_HEAD
Already up-to-date.
linux26 test log - PASS
spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc (intc)
setting qdev prop "kind-of-intr" = 0x00000100
connected irq : (none)
FDT: Creating QDEV model xilinx,timer
setting qdev prop "frequency" = 0x03b20b80
setting qdev prop "nr-timers" = 0x00000002
connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite
setting qdev prop "chr" = 0x08ee34e0
connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000,
FDT at 0x90437ff4
Linux version 3.9.0-rc4-00158-g9064171 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Thu Mar 28 12:13:51 CET 2013
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x90434000 size=0x00434000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
DMA [mem 0x90000000-0x9fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902e5df4, node_mem_map 90436000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65536 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255540k/262144k available (2880k kernel code, 6604k reserved, 89k data, 315k bss, 1012k init)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
No chosen timer found, using default
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 116.12 BogoMIPS (lpj=580608)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 499
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1012k freed
Bad inittab entry at line 3
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting sysfs:
Setting hostname:
Setting up interface lo:
Setting up interface eth0:
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd:
Mounting nfs server
uclinux login: root
Password:pass ok
/root # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/root # cat /proc/cpuinfo
CPU-Family: MicroBlaze
FPGA-Arch: virtex5
CPU-Ver: 7.10.d, big endian
CPU-MHz: 125.00
BogoMips: 116.12
HW:
Shift: yes
MSR: yes
PCMP: yes
DIV: yes
MMU: 3
MUL: v2
FPU: v2
Exc: op0x0 unal ill zero fpu
Stream-insns: privileged
Icache: no
Dcache: no
HW-Debug: no
PVR-USR1: 00
PVR-USR2: 00000000
Page size: 4096
/root # strace ls /
strace: applet not found
/root #
Statistic
3.9.0-rc4-00158-g9064171
4.1.2
CLEAN .
CLEAN arch/microblaze/kernel
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN arch/microblaze/boot
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/dtc
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config include/generated arch/microblaze/include/generated
CLEAN .config .version include/generated/uapi/linux/version.h Module.symvers
linux_next
linux_next update log - PASS
Checking out files: 14% (745/5250)
Checking out files: 15% (788/5250)
Checking out files: 16% (840/5250)
Checking out files: 17% (893/5250)
Checking out files: 18% (945/5250)
Checking out files: 19% (998/5250)
Checking out files: 20% (1050/5250)
Checking out files: 21% (1103/5250)
Checking out files: 22% (1155/5250)
Checking out files: 22% (1197/5250)
Checking out files: 23% (1208/5250)
Checking out files: 24% (1260/5250)
Checking out files: 25% (1313/5250)
Checking out files: 26% (1365/5250)
Checking out files: 27% (1418/5250)
Checking out files: 28% (1470/5250)
Checking out files: 28% (1498/5250)
Checking out files: 29% (1523/5250)
Checking out files: 30% (1575/5250)
Checking out files: 31% (1628/5250)
Checking out files: 32% (1680/5250)
Checking out files: 33% (1733/5250)
Checking out files: 34% (1785/5250)
Checking out files: 35% (1838/5250)
Checking out files: 36% (1890/5250)
Checking out files: 36% (1905/5250)
Checking out files: 37% (1943/5250)
Checking out files: 38% (1995/5250)
Checking out files: 39% (2048/5250)
Checking out files: 40% (2100/5250)
Checking out files: 41% (2153/5250)
Checking out files: 42% (2205/5250)
Checking out files: 43% (2258/5250)
Checking out files: 44% (2310/5250)
Checking out files: 45% (2363/5250)
Checking out files: 46% (2415/5250)
Checking out files: 47% (2468/5250)
Checking out files: 48% (2520/5250)
Checking out files: 49% (2573/5250)
Checking out files: 50% (2625/5250)
Checking out files: 51% (2678/5250)
Checking out files: 52% (2730/5250)
Checking out files: 52% (2732/5250)
Checking out files: 53% (2783/5250)
Checking out files: 53% (2810/5250)
Checking out files: 53% (2822/5250)
Checking out files: 53% (2824/5250)
Checking out files: 54% (2835/5250)
Checking out files: 55% (2888/5250)
Checking out files: 56% (2940/5250)
Checking out files: 56% (2957/5250)
Checking out files: 57% (2993/5250)
Checking out files: 57% (3032/5250)
Checking out files: 58% (3045/5250)
Checking out files: 59% (3098/5250)
Checking out files: 60% (3150/5250)
Checking out files: 61% (3203/5250)
Checking out files: 62% (3255/5250)
Checking out files: 63% (3308/5250)
Checking out files: 64% (3360/5250)
Checking out files: 65% (3413/5250)
Checking out files: 65% (3432/5250)
Checking out files: 66% (3465/5250)
Checking out files: 67% (3518/5250)
Checking out files: 68% (3570/5250)
Checking out files: 69% (3623/5250)
Checking out files: 70% (3675/5250)
Checking out files: 71% (3728/5250)
Checking out files: 72% (3780/5250)
Checking out files: 73% (3833/5250)
Checking out files: 74% (3885/5250)
Checking out files: 75% (3938/5250)
Checking out files: 76% (3990/5250)
Checking out files: 76% (4015/5250)
Checking out files: 77% (4043/5250)
Checking out files: 78% (4095/5250)
Checking out files: 79% (4148/5250)
Checking out files: 80% (4200/5250)
Checking out files: 81% (4253/5250)
Checking out files: 82% (4305/5250)
Checking out files: 83% (4358/5250)
Checking out files: 84% (4410/5250)
Checking out files: 85% (4463/5250)
Checking out files: 85% (4487/5250)
Checking out files: 86% (4515/5250)
Checking out files: 87% (4568/5250)
Checking out files: 88% (4620/5250)
Checking out files: 89% (4673/5250)
Checking out files: 90% (4725/5250)
Checking out files: 91% (4778/5250)
Checking out files: 92% (4830/5250)
Checking out files: 93% (4883/5250)
Checking out files: 93% (4887/5250)
Checking out files: 94% (4935/5250)
Checking out files: 95% (4988/5250)
Checking out files: 95% (5024/5250)
Checking out files: 95% (5025/5250)
Checking out files: 96% (5040/5250)
Checking out files: 96% (5046/5250)
Checking out files: 97% (5093/5250)
Checking out files: 98% (5145/5250)
Checking out files: 99% (5198/5250)
Checking out files: 100% (5250/5250)
Checking out files: 100% (5250/5250), done.
Switched to branch 'master'
Deleted branch next (was da17d7b).
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
* branch master -> FETCH_HEAD
Already up-to-date.
From ../linux-2.6
* branch HEAD -> FETCH_HEAD
Already up-to-date.
Fetching origin
Fetching linux-next
linux_next test log - FAILED
